Unichip OEM Benz ECO ON OFF Setting Module via OBD2

Please note: When placing your order, provide your Car VIN number for module compatibility.

Frustrated with your Mercedes-Benz ECO start/stop system defaulting to “ON” every time you start your car? The Unichip OEM Benz ECO ON OFF Setting Module offers a simple and effective solution. This OBD2 module allows you to effortlessly change the ECO start/stop default setting to “Last Mode Set,” remembering your preferred setting (ON or OFF) after each ignition cycle. No need for expensive dealership visits – this plug-and-play module puts control back in your hands.

Here’s why the Unichip OBD2 module is the ideal solution for your Mercedes-Benz ECO settings:

Key Features and Advantages

• Legally Compliant: The Unichip module operates within legal parameters. It modifies the default setting of your existing ECO system without altering or bypassing any original components. This ensures your vehicle remains compliant with regulations.
• “Last Mode Set” Memory: Enjoy a personalized driving experience. Once activated, the module ensures your ECO ON or OFF preference is memorized. If you prefer ECO mode to be OFF, it will remain OFF upon restarting your vehicle until you choose to reactivate it. Changing settings is as simple as plugging in the module again.
• User-Friendly and Removable: No permanent installation is required. The OBD2 module is designed for temporary use. Simply plug it in to set your desired ECO default, then remove it. This is especially convenient for dealership visits or when you want to revert to the factory default setting temporarily.
• VIN-Specific Locking: Each Unichip module is programmed to a specific Vehicle Identification Number (VIN). This ensures optimal performance and prevents unauthorized use on other vehicles. The module will register the first VIN it is used with and cannot be transferred to a second vehicle with a different VIN.
• Broad Compatibility: The Unichip module is designed to be compatible with a wide range of Mercedes-Benz ECO models. However, please note potential exceptions may include W213 models with OM654 OM656 diesel engines (MRD control unit) and Mercedes-Benz A, B, CLA, and GLA class vehicles equipped with Renault 1.6 diesel engines (OM607). Always confirm compatibility by providing your VIN when ordering.

Simple Installation Guide

Setting up your preferred ECO default setting with the Unichip OBD2 module is quick and straightforward:

1. Turn Ignition ON: Ensure your vehicle’s ignition is switched to the “ON” position (engine off).
2. Connect the UNICHIP OBD2 Module: Locate the OBD2 diagnostic port, typically found under the steering wheel. Plug the Unichip module securely into this port.
3. Observe the Instrument Cluster: Keep an eye on your instrument cluster. The “Check Engine” lamp (MIL) will begin to flash.
4. Wait for Flashing to Stop: Once the MIL lamp has flashed and stopped, the setting process is complete.
5. Turn Ignition OFF: Switch the vehicle ignition to the “OFF” position.
6. Disconnect the OBD2 Plug: Remove the Unichip OBD2 module from the diagnostic port.
7. Verify ECO Status: Start your vehicle and check the ECO status. It should now reflect the “Last Mode Set” preference.

Take control of your Mercedes-Benz ECO start/stop system with the Unichip OEM Benz ECO ON OFF Setting Module. Enjoy a more personalized and convenient driving experience by setting your preferred ECO default today.